HOW TO INSTALL A GYPROC DRYWALL SYSTEM

Gyproc RhinoBoard is a plasterboard and consists of an aerated or foamed gypsum core encased in and firmly bonded to special paper liners. RhinoBoard is used as lining or cladding for ceilings, drywalls and drylining. It is non combustible and is used as a lining in fire rated drywall and ceiling systems.

The face (unprinted) surface should receive all decoration (i.e. gypsum based plaster, paint, vinyl, etc.). Do not decorate the printed surface. Do not expose standard RhinoBoard to contact with water. It is not recommended for use in industrial kitchens and industrial bathrooms or exterior applications. Gyproc RhinoBoard is manufactured according to the ISO 9001 Quality Management System and the ISO 14001 Environmental Management System.

Step 1
Apply SoundSeal as a continuous application to the perimeter of the framework.

Step 2
Determine and mark wall position and make allowance for openings. Fix Donn UltraSTEEL® Track at 600mm centres using suitable fixings.

Step 3
Measure the wall height and cut stud to size. Install the stud into Donn UltraSTEEL® Floor Track.

Step 4
Twist Donn UltraSTEEL® stud into place.

Step 5
Ensure the stud is plumb and mark stud position.

Step 6
Fix the UltraSTEEL® stud to the abutting wall at 600mm centres using suitable fixings.

Step 7
Insert top UltraSTEEL® Track into position.

Step 8
Secure top UltraSTEEL® Track into position.

Step 9
Insert UltraSTEEL ® studs at 600mm centres to a friction fit within the channel sections - this allows for adjustment during boarding. Position the UltraSTEEL ® Studs so all face the same way.